Skip to main content
Stone Coat  Help Center home page
Community Submit a request
Sign in
  1. Stone Coat
  2. FAQ
  3. FAQ

FAQ

  • Can I use a tack cloth or clean with a tack cloth?
  • Does it scratch after it is cured?
  • Can I coat Cutting Board - Charcuterie - Cheese Board?
  • Do I have to wear a respirator for safety?
  • Can I use Pecky Cypress wood?
  • Can I use HVAC tape to seal cracks?
  • What is a burn in stick?
  • How can I Prevent warping cupping, moisture intrusion underside wood slab?
  • Do I use the same product for both seal and flood pour/coat?
  • Why is my slab table is cracking, warping?
  • What is the difference between Casting Vs. Super Cast?
  • Can I stain over varnish, oil based stain?
  • What is the proper ratio?
  • Can I cut and drill through cured epoxy?
  • What do I do if there is high humidity moisture in air?
  • Can I use conversion varnish on top?
  • Can I do more than one color coat?
  • What do I do if I see chunky, waxy, chunks, lumpy in my product?
  • What do I do if my product is frozen?
  • What is the curing temperature for countertops cold temperature?
  • What type of gas for torch should I use?
  • When should I use a Heat Gun or a Torch?
  • Can I use Silicone to seal my joints?
  • How do I remove Silicone?
  • How do I remove stains In the Epoxy?
  • Why do I see dimples, divots, low spots or uneven bubbles pitting Fish Eyes?
  • Pro Tips: Mike’s response on insiders Dents, divots, soft, fingernail
  • Why are objects denting/denting coffee cup rings?
  • How to deal with Dust, Dust Nibs, Dust in Top, dust
  • How do I publish my content in other languages?
  • Next ›
  • Last »
Stone Coat